FRAME/BODY PANELWEXHAUST SYSTEM
FRONT FENDER
Remove the following:
-
speedometer cable guide
-
three setting bolts
- front fender
Installation is in the reverse order of removal.
FLOOR LOWER COVER
Remove the following:
-
fuel drain hose
-
fourscrews
Release the rear end tabs from the floor panel.
Slide the floor lower cover forward and release the
center tabs to remove the floor lower cover from the
front lower cover.
Installation is in the reverse order of removal.
NOTE:
Align the mating area of the floor lower cover
and front lower cover properly.
FRONT UPPER COVER
Remove the following:
- two tapping screws (lower)
-
two washer-screws (upper)
-
front upper cover
Installation is in the reverse order of removal.
BOLTS
\
TAB
SCREWS
1
WASHER-SCREWS
UPPER
I
TAPPING
SCREWS
2-8