Using The [Data Log Book] (Optional) - ProMinent DULCOMETER Assembly And Operating Instructions Manual

1. Use the arrow keys to select
[Error log book]
2.
Press
3. Use the arrow keys to move the
[Record]
cursor to
4. Press
ð The activation symbol (tick)
appears in the selection boxes.
Now all warnings and error
messages are recorded.
Reading messages
5. Use the arrow keys to move the
[Read]
cursor to
6.
Press
ð This automatically removes the
activation symbol. If you wish to
record further errors after
[Reading] , then it is necessary
to reactivate the
[Error log book] . The tick re-
appears.
[error log book]
Deleting the
7. Use the arrow keys to move the
[Delete]
cursor to
8. Press
ð This will irrevocably delete the
error log book file on the SD
card.
Function: Data logger
Error log book
Entry
Warning 04 channel 2
The measuring channel is
not yet calibrated
Status coming
Fig. 105: Reading the [Error log book]
Use the arrow keys to browse through the
entries in the error log book. Press
return to the continuous display.
Using the
16.2.3
(optional)
The statuses of the digital inputs
The [Data log book] saves all meas‐
ured values, correction variables, con‐
trol variables and the status of the
digital inputs.
Data log book
Record
Read
Configure
Fig. 106: Configuring the [Data log book]
[Data log book] before
First configure the
you activate it. You can select which data
is to be recorded. All data is selected by
default. You can specify at what interval
the data is to be saved. For example, if
32/32
[Data log book]
to
9.1.3.1
143