Diagnostics; Displaying [Logbooks]; Displaying The [Calibration Log Book]; Reading The [Error Log Book] - ProMinent DULCOMETER Assembly And Operating Instructions Manual

[Diagnostics]

[Diagnostics]
17
User qualification: instructed user,
n
Ä Chapter 4.4 'Users' qualifica‐
see
tions' on page 21
Continuous display ➨
[Diagnostics] ➨
It is possible to look through log books,
perform a simulation of outputs or view
device information in this menu.
Diagnostics
Logbook
Simulation
Device information
Fig. 111: Diagnostics
17.1 Displaying
Continuous display ➨
[Diagnostics] ➨
[Calibration log book]
[Calibration log book]
Log books
Calibration log book
Error log book
Data log book
Fig. 112: Displaying [Log books]
146
➨ or
[Diagnostics]
[logbooks]
➨ or
[Diagnostics] ➨
17.1.1
The data on the sensor calibrations suc‐
cessfully completed are stored in the
[Calibration log book] . Up to 30
internal
calibrations can be stored. Thereafter the
oldest entry is overwritten with the most
recent entry.
The following data is stored:
9.1
Name of the measuring channel
n
Measured variable
n
Time of calibration
n
Zero point
n
Slope
n
Deleting entries in
[Calibration log book]
the
You can also delete entries in the Calibra‐
tion log book. Deleting the entries does
not affect the calibrations stored in the
controller.
or
17.1.2
9.1.1
The error message data is stored in the
[Error log book] . Up to 30 error messages
can be stored. Thereafter the oldest entry
is overwritten with the most recent entry.
Displaying the
[Calibration Log Book]
Reading the
[Error Log Book]