Displaying [Simulation]; Displaying [Device Information] - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Error log book
Entry
Error Channel 2
The connection to the
expansion module
is faulty
Status Goes
Fig. 113: [Error log book]
Deleting entries in the
You can also delete entries in the Error
log book. Deleting the entries does not
affect the errors stored in the controller.
17.2 Displaying
Continuous display ➨
[Diagnostics] ➨
[Simulation] [Simulation]
WARNING!
Uncontrolled response
Cause: A controller operates uncon‐
[Simulation] mode under full
trolled in
load and thus so do the connected
actuators.
Possible consequence: Fatal or very
serious injuries
Measure: Never leave a controller
and its installed functional modules
unsupervised if the simulation func‐
tion is active.
9.1.2.1.1
[Error log book]
[simulation]
➨ or
[Diagnostics] ➨
[Simulation] menu item enables you
The
to activate all outputs for test purposes
during commissioning. A simulated output
remains activated until you quite the
[Simulation] menu item. It is also possible
to prime a peristaltic pump, for example,
[Simulation] mode. A
with
Simulation
Relay 1
Relay 2
Alarm relay
Pump 1
Pump 2
Pump 3
Pump 4
mA output 1
mA output 1
Fig. 114: Displaying simulation
17.3
or
Continuous display ➨
[Diagnostics] ➨
[Device information]
[Device information]
Device info
Identity Code
Srnr:
Softw. version: 01.00.00.00
Module rev. 0100
Expansion module
Softw. version: 01.00.00.00
Operating temperature
Fig. 115: Device Information
[Diagnostics]
Off
Off
On
Off
Off
Off
On
Off
Off
Off
Displaying
[Device Information]
➨
[Diagnostics] ➨
15082008
35.5 °C
9.2.1
or
or
9.3.3
147