Configuring Log Books; Using The [Calibration Log Book] - ProMinent DULCOMETER Assembly And Operating Instructions Manual

If the SD card is in the controller, this is
displayed on the display in the top-left
[SD] symbol. If the SD card
corner by the
is 80% full, then this level also appears on
[80% full] . If the SD card is
the screen as
full, then the data is stored in the control‐
ler's internal memory. If this internal
memory is full, then the oldest data is
overwritten.
16.2

Configuring log books

User qualification: instructed user,
n
Ä Chapter 4.4 'Users' qualifica‐
see
tions' on page 21
Continuous display ➨
[Diagnostics] ➨
It is possible to look through log books,
perform a simulation of outputs or view
device information in this menu.
Diagnostics
Logbook
Simulation
Device information
Fig. 101: [Diagnostics] > [Log books]
➨ or
[Diagnostics]
The calibration log book stores all calibra‐
tions of measured variables with a time
stamp.
1.
Press
2. Use the arrow keys to select
[Diagnostics]
3. Press
4. Use the arrow keys to select
[Log books]
5.
Press
6. Use the arrow keys to select
[Calibration log book]
7. Press
16.2.1
Calibration log book
9.1
Record
Read
Clear
Fig. 102: Using the [calibration log book]
Function: Data logger
in the continuous display
Using the
[calibration log book]
9.1.1.1
141