Electrical Installation - ProMinent DULCOMETER Assembly And Operating Instructions Manual

1. Determine the precise position of the device on the control panel using the drilling
template
2. Mark the corner points and drill (drill diameter 12 - 13 mm)
3. Using a punching tool or jigsaw, match the opening to the punched template
drawing
4. Chamfer the cut edges and check whether the sealing surfaces are smooth for the
caulking strip
ð Otherwise the seal cannot be guaranteed.
5. Press the caulking strip evenly into the groove running around the device
6. Place the device into the control panel and fix in place at the rear by means of the
retaining brackets and PT cutting screws
ð The device should project approx. 35 mm from the control panel
6.3

Electrical installation

User qualification, electrical installa‐
n
tion: Electrical technician, see
Ä Chapter 4.4 'Users' qualifications'
on page 21
NOTICE!
Moisture at the contact points
Use appropriate structural and tech‐
nical measures to protect the con‐
necting plugs, cables and terminals
from moisture. Moisture at the contact
points can adversely affect the opera‐
tion of the device.
Assembly and installation
31