Using The [Error Log Book] - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Function: Data logger
1. Use the arrow keys to move the
[Record]
cursor to
2.
Press
ð The activation symbol (tick)
appears in the selection boxes.
Now all calibrations performed
are recorded.
Reading calibrations
3. Use the arrow keys to move the
[Read]
cursor to
4. Press
ð This automatically removes the
activation symbol. If you wish to
record further calibrations after
[Reading] , then it is necessary
to reactivate the
[Calibration log book] . The tick
re-appears.
[calibration log book]
Deleting the
5. Use the arrow keys to move the
[Delete]
cursor to
6. Press
ð This will irrevocably delete the
calibration log book file on the
SD card.
Calibration log book
Entry
Channel 1
Slope
Zero point
Fig. 103: Reading the
[calibration log book]
142
17/17
Chlorine
5.99 mA/ppm
4.00 mA
Use the arrow keys to browse through the
entries in the calibration log book. Press
to return to the continuous display.
16.2.2 Using the
Error log book
Record
Read
Clear
Fig. 104: Using the [error log book]
[error log book]
9.1.2.1