Keysight VXI Bus 75000 C Series User And Programming Manual page 99

[SOURce:] Subsystem
[SOURce:]DIGital:DATAn:LWORd:HANDshake[:MODE]? returns a string
indicating the type of handshake set on the 32-bit port n.
[SOURce:]DIGital:DATAn:LW64:HANDshake[:MODE]? returns a string indicating
the type of handshake set on the 64-bit port.
[SOURce:]DIGital:DATAn:LW96:HANDshake[:MODE]? returns a string indicating
the type of handshake set on the 96-bit port.
Parameters
Comments
Example
DIG:DATA3:HAND? returns the handshake mode set on port 3.
Keysight E1458A 96-Channel Digital I/O Module User Guide
Parameter Name Parameter Type
DATAn Numeric
–
The handshake <mode> must be the same on all ports used in
multiple-port operations.
– The keyword LW32 may be used instead of LWORd.
– This command will return one of the following strings:
NONE LEAD TRA PULS PART STR
– :DATAn[:type]HANDshake? is the sequence used for commands relating to
data handshaking at port n. The port number n must be the last character
of the keyword without spaces.
– Related Commands: [SOURce:]DIGital:HANDshaken:[DELay]
[SOURce:]DIGital:CONTroln:POLarity [SOURce:]DIGital:CONTroln[:VALue]
[SOURce:]DIGital:FLAGn:POLarity
– *RST Condition: Mode is NONE on all ports.
Keysight E1458A Command Reference
Range of Values
BYTE none, 0 through 11
WORD none, 0, 2, 4, 6, 8, or 10
LWORd none, 0, 4, or 8
LW64 none or 0
LW96 none or 0
Default
0
89