Keysight VXI Bus 75000 C Series User And Programming Manual page 124

Keysight E1458A Command Reference
Command
DIGital:FLAGn:POLarity?
DIGital:HANDshaken:DELay <time>
DIGital:HANDshaken:DELay? [MIN | MAX | DEF]
DIGital:HANDshaken[:MODE] <NONE | LEAD | TRA | PULS |
PART | STR>
DIGital:HANDshaken[:MODE]?
DIGital:IOn?
DIGital:TRAce:CATalog?
DIGital:TRAce[:DATA] <name><block_data>
DIGital:TRAce[:DATA]? <name>
DIGital:TRAce:DEFine <name><size>[<fill>]
DIGital:TRAce:DEFine? <name>
DIGital:TRAce:DELete[:NAME] <name>
DIGital:TRAce:DELete:ALL
STATus:OPERation:CONDition?
:OPERation:ENABle <mask>
:OPERation:ENABle?
:OPERation[:EVENt]?
:PRESet
114
Description
Returns the logical true level set for the flag line on the selected
port.
Sets delay between data output and assertion of control line for data
output on the selected 8-bit port. Also sets strobe pulse for both
output and input STROBE handshake.
Returns the time between data valid and assertion of control line to
TRUE on the selected 8-bit port.
Selects type of handshake to transfer data between selected
8-bit port and peripheral. Handshakes are initiated by
execution of DIG:DATAn or MEAS:DATAn? commands.
Returns the current handshake mode set on the selected 8-bit port.
Returns the current state of the I/O control line on the selected port.
Returns the currently defined memory blocks.
Writes a block of data to name.
Reads a block of data from name.
Defines name, size, and initial fill for a memory block.
Returns the size, in bytes, of the named memory block.
Deletes the named memory block.
Deletes all memory blocks.
Returns contents of Condition register.
Sets mask for Enable register.
Returns mask set in Enable register.
Returns the content of the Event register.
Clears Enable registers.
Keysight E1458A 96-Channel Digital I/O Module User Guide
Command Quick Reference