[Source:]Digital:controln[:Value]; [Source:]Digital:datan[:Type]:Bitm - Keysight VXI Bus 75000 C Series User And Programming Manual

[SOURce:] Subsystem

[SOURce:]DIGital:CONTroln[:VALue]?

[SOURce:]DIGital:CONTroln[:VALue]? reads the state of the control line on port n
and returns a 0 or 1, indicating the logical condition of the CTL line.
Parameters
Comments
Example
DIG:CONT2? returns the current state of the 8-bit port 2 control line.

[SOURce:]DIGital:DATAn[:type]:BITm

[SOURce:]DIGital:DATAn[:BYTE]:BITm <value> sets bit m on 8-bit port n.
[SOURce:]DIGital:DATAn:WORD:BITm <value> sets bit m on 16-bit port n.
[SOURce:]DIGital:DATAn:LWORd:BITm <value> sets bit m on 32-bit port n.
[SOURce:]DIGital:DATAn:LW64:BITm <value> sets bit m on 64-bit port n.
[SOURce:]DIGital:DATAn:LW96:BITm <value> sets bit m on 96-bit port n.
Parameters
Keysight E1458A 96-Channel Digital I/O Module User Guide
Parameter Name Parameter Type
CONTroln Numeric
– This command is used to create custom handshakes when the
HANDshake is set to NONE.
–
The condition of the CTL line returned by this command is the logical true
value set by the DIG:CONTn:[:VALue]? command.
Parameter Name Parameter Type
DATAn Numeric
BITm Numeric
<value> Numeric
Keysight E1458A Command Reference
Range of Values
none, 0 through 11
Range of Values
BYTE none, 0 through 11
WORD none, 0, 2, 4, 6, 8, or 10
LWORd none, 0, 4, or 8
LW64 none or 0
LW96 none or 0
BYTE 0 - 7
WORD 0 - 15
LWORd 0 - 31
LW64 0 - 63
LW96 0 - 95
0 or 1
Default
0
Default
0
None
None
81