Keysight E1458A 96-Channel Digital I/O Module
User Guide
2
Configuring the Keysight E1458A
Digital I/O Module
Using This Chapter
This chapter shows how to configure the Keysight E1458A Digital I/O Module for
use in a VXIbus mainframe, install it in a mainframe, connect peripheral devices,
and configure the module for operation. This chapter contains the following
sections:
WARNINGS and CAUTIONS
WARNINGS and CAUTIONS
Setting the Address Switch
Setting the Interrupt Priority
Enabling the Data Line Pull-up Network
Combining the Flag Lines
Installing the Keysight E1458A Digital I/O Module in a
Mainframe
page 20
Connecting to Peripheral Devices
Configuring for Isolated Digital I/O
SHOCK HAZARD. Only service-trained personnel who are
aware of the hazards involved should install, remove, or
configure the digital I/O module. Before you remove any
installed module, disconnect AC power from the
mainframe. Disconnect power connected to the
inputs/outputs of this module and other modules in the
mainframe.
page 11
page 12
page 14
page 16
page 18
page 22
page 25
11