[Source:]Digital:datan[:Type]:Bitm - Keysight VXI Bus 75000 C Series User And Programming Manual

Keysight E1458A Command Reference
Comments
Example
DIG:DATA3:BIT4 1 sets bit 4 (the 5th bit) of port 3 to logical 1.

[SOURce:]DIGital:DATAn[:type]:BITm?

[SOURce:]DIGital:DATAn[:BYTE]:BITm? returns a 0 or 1 indicating the current
programmed state of bit m on 8-bit port n.
[SOURce:]DIGital:DATAn:WORD:BITm? returns a 0 or 1 indicating the current
programmed state of bit m on 16-bit port n.
[SOURce:]DIGital:DATAn:LWORd:BITm? returns a 0 or 1 indicating the current
programmed state of bit m on 32-bit port n.
[SOURce:]DIGital:DATAn:LW64:BITm? returns a 0 or 1 indicating the current
programmed state of bit m on 64-bit port n.
[SOURce:]DIGital:DATAn:LW96:BITm? returns a 0 or 1 indicating the current
programmed state of bit m on 96-bit port n.
Parameters
82
– :DATAn and :BITm are the keywords used to write data to port n and bit m.
The port number n and bit number m must be the last character of the
keyword without spaces.
– For 16-bit operations using :WORD, n must be 0, 2, 4, 6, 8, or 10.
– For 32-bit operations using :LWORd, n must be 0, 4, or 8.
– For 64-bit or 96-bit operations using :LW64 or :LW96, n must be 0.
– The keyword LW32 may be used instead of LWORd.
– Related Commands: [SOURce:]DIGital:DATAn[:VALue]
[SOURce:]DIGital:DATAn:POLarity
–
*RST Condition: All ports are set for data input.
Parameter Name Parameter Type
DATAn Numeric
Range of Values
BYTE none, 0 through 11
WORD none, 0, 2, 4, 6, 8, or 10
LWORd none, 0, 4, or 8
LW64 none or 0
LW96 none or 0
Keysight E1458A 96-Channel Digital I/O Module User Guide
[SOURce:] Subsystem
Default
0