Connecting To Peripheral Devices - Keysight VXI Bus 75000 C Series User And Programming Manual

Configuring the Keysight E1458A Digital I/O Module

Connecting to Peripheral Devices

Each of the four Keysight E1458A Digital I/O Module peripheral connectors has
64 pins. The connectors are compatible with industry standard 64-pin.100" X
.100" wire mount sockets. A compatible socket can be obtained by ordering
Keysight part number 1252-1581 (3M Part Number 7964-6500EC) for
compatibility with 0.050" ribbon cable. For discrete wire compatibility use 3M
part number CHG-2064-J01010-KCP.
Figure 2-5 shows the peripheral connectors, their pin numbers, and the
corresponding line names. Figure 2-6 shows the digital I/O ribbon cables
(Keysight Part Number E1458-61601) and the line locations within the ribbon
connector.
22
Not all control lines are required for every application. The use of
each control line is described in Chapter 3.
Keysight E1458A 96-Channel Digital I/O Module User Guide
Connecting to Peripheral Devices