Keysight VXI Bus 75000 C Series User And Programming Manual page 105

[SOURce:] Subsystem
[SOURce:]DIGital:DATAn:LWORd[:VALue]? returns the programmed state of
32-bit port n as a decimal number between -231 and (231 - 1).
[SOURce:]DIGital:DATAn:LW64[:VALue]? returns the programmed state of the
64-bit port as two decimal values, each in the range of -231 to (231 - 1).
[SOURce:]DIGital:DATAn:LW96[:VALue]? returns the programmed state the
96-bit port as three decimal numbers, each in the range of -231 to (231 - 1).
Parameters
Comments
Example
DIG:DATA3? returns the decimal equivalent of the data lines on 8-bit port 3.
Keysight E1458A 96-Channel Digital I/O Module User Guide
Parameter Name Parameter Type
DATAn Numeric
–
This command returns the programmed state of the data lines. The
DIG:DATAn[:type]:MON? returns the actual state of the data lines.
– :DATAn is the keyword used for commands relating to data output at port
n. The port number n must be the last character of the keyword without
spaces.
– Related Commands: [SOURce:]DIGital:DATAn:BITm
[SOURce:]DIGital:DATAn:POLarity
–
*RST Condition: All ports are set for data input.
Keysight E1458A Command Reference
Range of Values
BYTE none, 0 through 11
WORD none, 0, 2, 4, 6, 8, or 10
LWORd none, 0, 4, or 8
LW64 none or 0
LW96 none or 0
Default
0
95