Keysight VXI Bus 75000 C Series User And Programming Manual page 93

[SOURce:] Subsystem
Comments
Example
DIG:DATA3:BIT4:VAL? returns a 0 or 1 indicating the last programmed state of bit
4 on port 3.
Keysight E1458A 96-Channel Digital I/O Module User Guide
BITm Numeric
–
This command performs a readback of the data line register. the
DIG:DATAn[:type]:BITm:MON? command returns the actual condition of
the data lines.
–
The keyword LW32 may be used instead of LWORd.
–
:DATAn and :BITm are the keywords used to write data to port n and bit m.
The port number n and bit number m must be the last character of the
keyword without spaces.
–
For 16-bit operations using :WORD, n must be 0, 2, 4, 6, 8, or 10.
–
For 32-bit operations using :LWORd, n must be 0, 4, or 8.
–
For 64-bit or 96-bit operations using :LW64 or :LW96, n must be 0.
–
Related Commands: [SOURce:]DIGital:DATAn[:VALue]
[SOURce:]DIGital:DATAn:POLarity
Keysight E1458A Command Reference
BYTE 0 - 7
WORD 0 - 15
LWORd 0 - 31
LW64 0 - 63
LW96 0 - 95
None
83