Memory:vme:address - Keysight VXI Bus 75000 C Series User And Programming Manual

Keysight E1458A Command Reference

MEMory:VME:ADDRess

MEMory:VME:ADDRess [<base>]<address> establishes the address of add-on
VME memory in the system which can then be used to store block data in
commands with the :TRACE keyword.
Parameters
Comments
Example
MEM:VME:ADDR #H200000 sets the starting VME address to 20000016.
72
Parameter Parameter
Name Type
<base> Discrete
<address> Numeric or
Discrete
– <base> specifies the numeric format as decimal, hexadecimal, octal, or
binary. IEEE-488.2 specifies the following values for this parameter:
– Decimal = no parameter
Hexadecimal = #H Octal = #Q
Binary = #B
– Valid values for <base><address> are #H200000 (2,097,152 decimal)
through #HDFFFF8 (14,680,056 decimal).
– For this memory to actually be used it must also have a defined length and
have been turned ON using the MEMory:VME:STATe command.
– Related Commands: SOUR:DIG:TRAC:DEF <name>,<size>
MEMory:VME:ADDress? MEMory:VME:SIZE <size> MEMory:VME:STATe
<ON or OFF>
– *RST Condition: #H200000.
Range of Values
none, #H, #Q, or #B
20000016 - DFFFF816
MIN or MAX
Keysight E1458A 96-Channel Digital I/O Module User Guide
MEMory Subsystem
Default
Decimal
None