[Source:]Digital:handshaken[:Mode] - Keysight VXI Bus 75000 C Series User And Programming Manual

[SOURce:] Subsystem

[SOURce:]DIGital:HANDshaken[:MODE]

[SOURce:]DIGital:HANDshaken[:MODE] <mode> selects the type of handshake
mode and defines the timing relationship between the control (CTL) line, the flag
(FLG) line, and when data is transferred in either direction between the Keysight
E1458A Digital I/O Module and a peripheral on 8-bit port n. This form of the
HANDshake command operates only on 8-bit ports.
Parameters
Comments
Example
DIG:HAND3 LEAD sets the handshake mode to LEADing on 8-bit port 3.
Keysight E1458A 96-Channel Digital I/O Module User Guide
Parameter Parameter
Name Type
HANDshaken Numeric
<mode> Discrete
– :HANDshaken is the keyword used for commands relating to data
handshaking at port n. The 8-bit port number n must be the last character
of the keyword without spaces.
– NONE deletes all automatic data handshaking between the digital I/O
module and the peripheral. For custom handshaking, the control and the
flag lines are controlled by the DIGital:CONTroln and DIGital:FLAGn
commands.
– Related Commands: [SOURce:]DIGital:HANDshaken:DELay
[SOURce:]DIGital:CONTroln:POLarity [SOURce:]DIGital:CONTroln[:VALue]
[SOURce:]DIGital:FLAGn:POLarity
– *RST Condition: Mode is NONE on all ports.
Keysight E1458A Command Reference
Range of Values
None, 0 through 11
NONE, LEADing, TRAiling, PULSe
PARTial, or STRobe
Default
0
NONE
99