Addressing The Module - Keysight VXI Bus 75000 C Series User And Programming Manual

Addressing the Module

Addressing the Module
The examples shown in this chapter use the default addresses for the interface,
command module, and digital I/O module. The address uses both GPIB primary
and secondary addresses. The default address is:
To establish these defaults as an I/O path in BASIC, the program examples use
this code:
Each digital I/O module in a system must have a different logical address.
Additionally, no two instruments in the same system can have the same logical
address. Setting the logical address is described in Chapter 2, "Configuring the
Keysight E1458A Digital I/O Module".
Keysight E1458A 96-Channel Digital I/O Module User Guide
7
GPIB Primary Address
Interface Select Code
10 ASSIGN @Dio TO 70918
Using the Keysight E1458A Digital I/O Module
0 9
GPIB Secondary Address
Command Module
GPIB Address
1 8
Digital I/O Module
Address Instrument
(LADDR?8)
31