Table of Contents
Troubleshooting
Related Manuals for Keysight M9195A PXIe
Summary of Contents for Keysight M9195A PXIe
- Page 1 Service Guide For the Startup Guide, software, and other important docu- mentation, see the M9195A Software and Product Informa- tion CD Keysight M9195A PXIe Digital Stimulus/Response with PPMU: 250 MHz, 16 channel...
- Page 2 © Keysight Technologies, Inc. 2015 No part of this manual may be repro- THE MATERIAL CONTAINED IN THIS To contact Keysight for sales and techni- duced in any form or by any means DOCUMENT IS PROVIDED “AS IS,” AND cal support, refer to the support links on...
-
Page 5: Table Of Contents
..........23 Keysight M9195A PXIe Digital Stimulus/Response Service Guide... - Page 6 Driver help system Studio Press F1 with M and driver focus on Method programmer’s reference Driver help system driver programmer’s reference ntext Help with detailed information 5972-3341 29 July 2011 Keysight M9195A PXIe Digital Stimulus/Response Service Guide...
-
Page 7: Introduction
Introduction Introduction This document is intended for use by Keysight Service Centers and by M9195A customers. Self-maintaining customers using the Keysight Test Management Environment (TME) with the N7876A application for M9195A calibration must refer to the help systems accompanying that software (see “Related... - Page 8 If you ran the product software installer, you can access the related documentation (startup guide, data sheet, SFP help, and LabVIEW help) from Start > Programs > Keysight > MDSR. For IVI driver help, see Start > Programs > Keysight IVI Drivers > KtMDSR. LabVIEW help installs through the LabVIEW driver.
-
Page 9: High-Level Diagnostic Tools, Processes And References
This section provides high-level tools, processes, and references to help diagnose problems with an M9195A DSR module. Before attempting to diagnose the Keysight M9195A, make sure you have followed the necessary startup instructions in the M9195A Startup Guide. This is available on the Software and Product Information CD, or the product website: www.Keysight.com/find/M9195A... - Page 10 Module for Service” on page 22. 2 Does the M9195A appear correctly on Keysight Connection Expert? – Bring up Connection Expert and click on the “PXIe/AXIe Chassis” tab then check to see if the M9195A in question appears in the correct slot.
-
Page 11: Status Led Summary
Verify that the following installations are present. For software check Start > Control Panel> Programs and Features> - Keysight IO Libraries Suite. You must be using version 16.3 update 2 or later. - Keysight Digital Stimulus/Response Driver - Module (KtMDsr IVI Driver 1.0.10) and chassis drivers (Keysight M901x PCIe... -
Page 12: Chassis Cooling Checks
“Returning a Module for Service” on page 22. If you wish, turn off the Identify Indicator, once you have checked it. Keysight M9195A PXIe Digital Stimulus/Response Service Guide... -
Page 13: Check Module Temperature
6 may result in the “Overtemperature in FPGA” error message and the appearance that the module has failed. Before returning a module to Keysight due to an overtemperature condition, any chassis cooling deficiencies must be corrected and the module temperature should be re-confirmed. -
Page 14: Run Automatic Corrections
Run Automatic Corrections Automatic Corrections runs an algorithm which automatically calculates corrections for the module. Keysight recommends running Automatic Corrections regularly, and whenever ambient temperature shift by over 5 Automatic Corrections takes several minutes to complete. At the end of the Automatic Corrections procedure, the M9195A is left in its power-on, reset state. - Page 15 Follow all on-screen instructions. All input cables must be removed from the module before executing Automatic Corrections. 7 When Automatic Corrections is complete, the M9195A is left in its power-on, reset state. Keysight M9195A PXIe Digital Stimulus/Response Service Guide...
-
Page 16: Run Self-Test
Start the SFP self tests by selecting: Utilities > Sel f Test > Run Sel f Test. A self test box will appear and give the start time. The test should complete in around 3 minutes. Keysight M9195A PXIe Digital Stimulus/Response Service Guide... - Page 17 Reset system and re-try test. If problem persists, see “Returning a Module for Service” on page 22. – "Keysight IO Version <Current version> is earlier than minimum required" “Check Software Installation” on page 5. Keysight M9195A PXIe Digital Stimulus/Response Service Guide...
- Page 18 If OK on another source, check the source of the PXIe_DStarA trigger. If the problem is with the Front Panel source, disconnect it and check it with an oscilloscope. If PXI 100 is indicated, check diagnostics available for the chassis. Keysight M9195A PXIe Digital Stimulus/Response Service Guide...
-
Page 19: Using Keysight N7876A Calibration And Adjustment Software
Using Keysight N7876A Calibration and Adjustment Software Introduction Calibration Requirements Keysight recommends calibration of the M9195A at least every year. The module may be sent to a Keysight service center or calibrated by self-maintaining customers using a Keysight Test Management Environment (TME) application. -
Page 20: Performance Verification And Adjustment Process
Performance Verification should almost always pass the adjustment procedure. Running the second set of performance verification tests ensures that the M9195A is still operating within its specifications. This “verify-adjust-verify” sequence ensures operation within specifications and provides useful records on the instrument. Keysight M9195A PXIe Digital Stimulus/Response Service Guide... -
Page 21: Getting Started With N7876A Performance Verification And Adjustment Software
16 – for Adjustment, see “Equipment Required” on page 17 2 Purchase the appropriate license by contacting Keysight at: www.keysight.com/find/assist 3 Download and install N7800A and N7876A from: http://cal.software.keysight.com/ 4 Bring up the N7800A software and enter the details regarding model, serial number, and calibration data of your lab standards into the N7800A software. -
Page 22: Test Setup
Adapter, BNC (f) to Dual Banana 1251-2277 PXIe chassis M901xX Embedded controller for PCIe chassis (or below) M903xX Host PC with GPIB interface GPIB interface: Keysight 82351B or NI GPIB-USB-HS. GPIB cable, 1 meter Keysight M9195A PXIe Digital Stimulus/Response Service Guide... -
Page 23: Adjustment Setup Equipment Requirement
Digital multimeter 3458A Cable harness, adjustment Y1252A PXIe chassis M901xX Embedded controller for PCIe chassis (or below) M903xX Host PC with GPIB interface GPIB interface: Keysight 82351B or NI GPIB-USB-HS. GPIB cable, 1 meter Keysight M9195A PXIe Digital Stimulus/Response Service Guide... -
Page 24: Service
After the replacement module is installed, connect the Soft Front Panel select Utilities and then Hardware Service Wizard. The Hardware Service Wizard will direct you through the process of updating your license with the Keysight Software Manager. Keysight M9195A PXIe Digital Stimulus/Response Service Guide... -
Page 25: M9195A Module Core Replacement
20) of the defective module. You will assign this serial number to the replacement module using the Keysight DSR Hardware Service Wizard. 4 Remove the replacement module from the box and shipping material. 5 Remove the Side Shield from the defective module. - Page 26 Service Serial Number Side Shield Figure 2 M9195A Module Side Shield with Serial Number Location 9 Torx T8 screws Figure 3 Side Shield and the screws holding it in place Keysight M9195A PXIe Digital Stimulus/Response Service Guide...
- Page 27 Step 10). 10 Power up the chassis. 11 Launch the SFP from Start > All Programs > Keysight > MDsr SFP. 12 To transfer the original serial number to the new module containing the replacement core select Utilities >...
-
Page 28: Returning A Module For Service
To avoid damage when handling a module, do not touch exposed connector pins. 1 Review the warranty information shipped with your product. 2 Contact Keysight to obtain a Return Material Authorization (RMA) and return address. For assistance finding Keysight contact information, go to www.keysight.com/find/assist (worldwide contact information for repair and service) or refer to the “Support”... -
Page 29: Esd Precautions
ESD protection. Of the two, only the table-mat and wrist-strap combination provides adequate ESD protection when used alone. To ensure user safety, the static-safe accessories must provide at least 1 M of isolation from ground. Keysight M9195A PXIe Digital Stimulus/Response Service Guide... - Page 30 This information is subject to change without notice. © Keysight Technologies 2015 Published in Malaysia Edition November 2015 *M9195-90009* M9195-90008 www.keysight.com...
Need help?
Do you have a question about the M9195A PXIe and is the answer not in the manual?
Questions and answers