Keysight E1458A Command Reference
Example
DISP:MON:PORT 3 sets the port to be monitored to 3.
DISPlay:MONitor:PORT?
DISPlay:MONitor:PORT? [<MAX | MIN | DEF>], with no parameter, returns a
decimal number indicating the port being monitored. If AUTO was selected as
the port parameter in the DISP:MON:PORT AUTO command, the query returns a
-1. If DEF is specified, the query always returns -1. If MAX is specified, the query
returns the maximum port (always 11). If MIN is specified, the query returns the
minimum port (always 0).
Parameters
Comments
Example
DISP:MON:PORT? identifies the port being monitored.
DISPlay:MONitor[:STATe]
DISPlay:MONitor[:STATe] <OFF | ON> turns the monitor mode on and off.
Parameters
Comments
64
Parameter Name
[<MAX | MIN | DEF>]
–
Related Commands: DISPlay:MONitor:PORT DISPlay:MONitor[:STATe]
–
*RST Condition: Not applicable.
Parameter
Parameter
Name
Type
<OFF | ON>
Boolean
–
DISP:MON ON enables the terminal display of port parameters. The
parameters are updated to the terminal following each new command
accessing a port.
Parameter Type
Range of Values
Optional or
None
Discrete
MAX, MIN, or DEF
Range of Values
0 | 1, OFF | ON
Keysight E1458A 96-Channel Digital I/O Module User Guide
DISPlay Subsystem
Default
None
Default
None