Operation
3.4
Cleaning
Warning
Three-wheeled vehicles have lower driving stability than four-
wheeled vehicles and therefore tend to have a higher risk of tilting
over. The following measures should be observed:
Avoid sudden steering movements at higher speeds or
excessive speeds when turning.
Only turn the machine on level surfaces.
When driving uphill, downhill or across slopes, avoid sudden
turns and drive slowly into the bend.
Drive slowly on wet surfaces, particularly in bends, due to the
risk of skidding.
Adapt the driving style and speed to the ambient conditions, the
local conditions and the load condition of the machine.
Never leave the machine unattended until it has been stopped
and secured against unintentional movement by removing the
key.
When working with the machine, pay special attention to third
persons, especially children.
When driving over thresholds, all working units must be switched
off beforehand.
Excessive quantities of dust must be avoided when working with
the pre-sweep suction unit!
Switch on the warning device (BlueSpot, flashlight, acoustic
warning reverse gear, etc.) (option) during all work and when
transporting or moving the machine.
When moving the machine, all working units must be switched off.
Use the brake button in case of danger.
Danger of tilting over when driving on excessively steep slopes
Cleaning on slopes of up to 6 % (standard drive) or 15 % (X-AC
drive) must only take place for a limited period of time and with
special caution.
82
Scrubmaster B400 R (7190)