3.4
Cleaning
Attention
• Before operating the machine, read and observe the safety
instructions in chapter 1.
• The machine can only be put into service when the driver is sitting
on the driver's seat.
• The travel drive can only be started when the accelerator pedal is
not actuated when turning the machine on.
No.
Description
1
Turn on the machine.
2
Activate the Fleet-Recorder (option)
3
Use the driving direction selection button to select the driving
direction
4
Select the cleaning programme
5
Actuate the accelerator pedal. The brushes and the water
supply of the last selected setting are switched on.
6
If necessary, switch on the fresh water supply.
7
Adjust the fresh water quantity using the respective button.
8
In case of heavy contamination
increase the brush pressure,
or
actuate the boost button for 1 minute.
03-7177-00.fm
Putting into service
39