Cleaning Units - HAKO Scrubmaster B175 R Series Manual

6. Machine settings
6.1 Basic settings

6.1.1 Cleaning units

3 different brush units are used with the Scrubmaster B175 R.
Two plate brush units with a working width of 90 cm or 108 cm, and a cylindrical brush
unit with a working width of 85 cm.
This setting is necessary for correct functioning of the overrange limits and water
quantities.
To check and change the setting of the cleaning units, proceed as described in
Chapter 2.4 Configuration. The possible setting parameters for the operative units are
specified in Table 6.1.
Sheet 57