Fig. 93 Default Behaviour Of The System Manager; Fig. 94 Default Target State In The Slave - Beckhoff EL3773 Documentation

Commissioning
Standard setting
The advanced settings of the EtherCAT Master are set as standard:
• EtherCAT Master: OP
• Slaves: OP
This setting applies equally to all Slaves.
Fig. 93: Default behaviour of the System Manager
In addition, the target state of any particular Slave can be set in the "Advanced Settings" dialogue; the
standard setting is again OP.
Fig. 94: Default target state in the Slave
82 Version: 2.5 EL3773