Beckhoff EL3773 Documentation page 159

Text ID Type Place
0x841C Error Drive
0x8550 Error Inputs
0x8551 Error Inputs
0x8552 Error Inputs
0x8553 Error Inputs
0x8581 Error Inputs
0x8600 Error General IO
0x8601 Error General IO
0x8602 Error General IO
0x8603 Error General IO
0x8610 Error General IO
0x8611 Error General IO
0x8612 Error General IO
0x8613 Error General IO
0x8700 Error
0x8701 Error
0x8702 Error
0x8703 Error
0x8704 Error
0x8705 Error
0x8706 Error
0x8707 Error
0x8708 Error
0x8709 Error
0x870A Error
0x870B Error
0xFFFF Information
EL3773
Text Message Additional comment
STO while the axis was An attempt was made to activate the axis, despite the
enabled fact that no voltage is present at the STO input.
Zero crossing phase %X Zero crossing phase %X missing
missing
Phase sequence Error Wrong direction of rotation
Overcurrent phase %X Overcurrent phase %X
Overcurrent neutral wire Overcurrent neutral wire
Wire broken Ch %D Wire broken Ch %d
Wrong supply voltage Supply voltage not in the correct range
range
Supply voltage to low Supply voltage too low
Supply voltage to high Supply voltage too high
Over current of supply Overcurrent of supply voltage
voltage
Wrong output voltage Output voltage not in the correct range
range
Output voltage to low Output voltage too low
Output voltage to high Output voltage too high
Over current of output Overcurrent of output voltage
voltage
Channel/Interface not Channel/interface not synchronized
calibrated
Operating time was ma- Operating time was manipulated
nipulated
Oversampling setting is Oversampling setting not possible
not possible
No slave controller found No slave controller found
Slave controller is not in Slave controller is not in bootstrap
Bootstrap
Processor usage to high Processor load too high (>= 100%%)
(>= 100%%)
Channel in saturation Channel in saturation
Channel overload Channel overload
Overloadtime was ma- Overload time was manipulated
nipulated
Saturationtime was ma- Saturation time was manipulated
nipulated
Channel range error Measuring range error for the channel
no ADC clock No ADC clock available
Debug: 0x%X, 0x%X, 0x Debug: 0x%X, 0x%X, 0x%X
%X
Version: 2.5
Diagnosis
159