Example Programs - Beckhoff EL3773 Documentation

Fig. 152: Diagram signal delay (linear)
3. Additional information:
may be provided in the specification, e.g.
3.1 Actual sampling rate of the ADC (if different from the channel sampling rate)
3.2 Time correction values for run times with different filter settings
...
6.11

Example programs

Using the example programs
This document contains sample applications of our products for certain areas of applica-
tion. The application notices provided here are based on typical features of our products
Note
and only serve as examples. The notices contained in this document explicitly do not refer
to specific applications. The customer is therefore responsible for assessing and deciding
whether the product is suitable for a particular application.
We accept no responsibility for the completeness and correctness of the source code con-
tained in this document. We reserve the right to modify the content of this document at any
time and accept no responsibility for errors and missing information.
The program presented below serves as an initial introduction to the options for evaluating
the data from a mains monitoring terminal. The user is free to change the program to suit
his ideas or to use only part of the code.
EL3773 Version: 2.5
Commissioning
135