Commissioning
Fig. 100: Amplitude curve
Changes in the CoE directory
In case of changes to the CoE default parameters, it is essential that corresponding values
are entered in the start-up list, so that in the case of exchange the EL3773 operates again
Note
as foreseen in the application.
6.5
Process data
Table of contents
• Data flow [} 86]
• Data processing [} 87]
• Predefined PDO Assignment [} 89]
• Process image [} 90]
• Control/status word [} 91]
• Synchronization and conversion time [} 92]
Data flow
The amplitude values are measured with 16-bit resolution and provided as oversampling packets in the
process image for cyclic transmission.
Fig. 101: Process data flow EL3773
86
Version: 2.5
EL3773