Fig. 27 Selection Of The Target System; Fig. 28 Specify The Plc For Access By The Twincat System Manager: Selection Of The Target System - Beckhoff EL6652-00 0 Series Documentation

Commissioning
Fig. 27: Selection of the target system
Use "Search (Ethernet)..." to enter the target system. Thus a next dialog opens to either:
• enter the known computer name after "Enter Host Name / IP:" (as shown in red)
• perform a "Broadcast Search" (if the exact computer name is not known)
• enter the known computer IP or AmsNetID.
Fig. 28: Specify the PLC for access by the TwinCAT System Manager: selection of the target system
Once the target system has been entered, it is available for selection as follows (a password may have to be
entered):
After confirmation with "OK" the target system can be accessed via the System Manager.
38 Version: 2.5 EL6652-00x0