Beckhoff EL3773 Documentation page 157

Text ID Type Place
0x8000 Error System
0x8001 Error System
0x8002 Error System
0x8003 Error System
0x8004 Error System
0x8005 Error System
0x8006 Error System
0x8007 Error System
0x8100 Error General
0x8101 Error General
0x8102 Error General
0x8103 Error General
0x8104 Error General
0x8105 Error General
0x8135 Error General
0x8136 Error General
0x8137 Error General
0x8140 Error General
0x8141 Error General
0x8142 Error General
0x8143 Error General
0x817F Error General
0x8200 Error Communication Write access error: %d,
0x8201 Error Communication No communication to
0x8281 Error Communication Ownership failed: %X
0x8282 Error Communication To many Keys founded
0x8283 Error Communication Key Creation failed: %X
0x8284 Error Communication Key loading failed
0x8285 Error Communication Reading Public Key
0x8286 Error Communication Reading Public EK
0x8287 Error Communication Reading PCR Value
EL3773
Text Message Additional comment
%s: %s
Error: 0x%X, 0x%X, 0x General error; parameters depend on event. See de-
%X vice documentation for interpretation.
Communication aborted Communication aborted
Configuration error: 0x General; parameters depend on event.
%X, 0x%X, 0x%X
See device documentation for interpretation.
%s: Unsuccessful Fw-
dOpen-Response re-
ceived from %d.%d.%d.
%d (%s) (Error: %u)
%s: FwdClose-Request
sent to %d.%d.%d.%d
(%s)
%s: Unsuccessful Fwd-
Close-Response re-
ceived from %d.%d.%d.
%d (%s) (Error: %u)
%s: Connection with %d.
%d.%d.%d (%s) closed
Status word set: 0x%X, Error bit set in the status word
%d
Operation mode incom- Mode of operation incompatible with the PDO interface
patible to PDO interface:
0x%X, %d
Invalid combination of In- Invalid combination of input and output PDOs
puts and Outputs PDOs
No variable linkage No variables linked
Terminal-Overtempera- The internal temperature of the terminal exceeds the
ture parameterized error threshold. Activation of the termi-
nal is prevented
PD-Watchdog Communication between the fieldbus and the output
stage is secured by a Watchdog. The axis is stopped
automatically if the fieldbus communication is inter-
rupted.
- The EtherCAT connection was interrupted during op-
eration
- The Master was switched to Config mode during op-
eration
Cycle time has to be a The IO or NC cycle time divided by 125 µs does not
multiple of 125 µs produce a whole number
Configuration error: in- Configuration error: Invalid sampling rate
valid sampling rate
Electronic type plate: Content of the external name plate memory invalid.
CRC error
Sync Error Real-time violation
Sync%X Interrupt lost Sync%X Interrupt lost
Sync Interrupt asynchro- Sync Interrupt asynchronous
nous
Jitter too big Jitter limit violation
Error: 0x%X, 0x%X, 0x
%X
Error while writing
%d
- There is no voltage applied to the power contacts
field-side (Auxiliary volt- - A firmware update has failed
age missing)
failed: %X
failed: %X
failed: %X
Version: 2.5
Diagnosis
157