5.3.5
Entering the TwinSAFE addresses in the System Manager
The TwinSAFE address set at the DIP switch must also be entered under the TwinSAFE Logic tab
(TwinSAFE address entry).
Fig. 13: Entering a TwinSAFE address
Parameter overview
PrmName
Meaning
S_Address
DIP switch address
Channel 1
Activation of channel 1
Channel 2
Activation of channel 2
Channel 3
Activation of channel 3
Channel 4
Activation of channel 4
KL2904
Version: 3.1.0
Operation
Values
1 to 1023
active/not active
active/not active
active/not active
active/not active
33