Entering A Twinsafe Address And Parameters In The System Manager; Fig. 22 Entering The Fsoe Address - Beckhoff EL1904 Operating Instructions Manual

Operation
5.4.5 Entering a TwinSAFE address and parameters in the System
Manager
The TwinSAFE address set at the DIP switch must also be entered in tab FSoE (under FSoE address) under
the EL1904.
Fig. 22: Entering the FSoE address
The EL1904 parameters are set under the respective TwinSAFE connection in the Connection and
Parameter tabs.
42 Version: 3.0.0 EL1904