Installation Of The Drive And Position Measuring System - Festo CPX-CMAX-C1-1 Mounting, Installation And Diagnostics

2. Fitting and pneumatic installation
2.3

Installation of the drive and position measuring system

Drive
Design Type
DGCI
Linear drive
DGP(L)
Cylinder
DNCI
DNC
DNCM
Semi−rotary drive DSMI
Tab. 2/1: Drive overview (as of August 2009)
2−6
Use only the drive/displacement encoder combinations
approved by Festo for the CMAX.
Note
In order to avoid damage due to uncushioned movement
into the end positions:
Use appropriate shock absorbers.
·
Define the software end positions.
·
To avoid damage to the displacement encoder when the
displacement encoder is shorter than the drive stroke:
Limit the travel range with additional end stops.
·
Tab. 2/1 shows the approved drive/displacement encoder
combinations:
Displacement encoder
Design, function
Digital (absolute)
Potentiometer (absolute)
Encoder (incremental)
Potentiometer (absolute)
Potentiometer (absolute)
Potentiometer (absolute)
Further drives are in preparation.
Type
Integrated
MLO−POT−TLF−...
Integrated
MLO−POT−LWG−...
Integrated
Integrated
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
Sensor
interface i t f
CASM−S−D2−R3
CASM−S−D3−R7
CASM−S−D2−R3
CASM−S−D2−R3
CASM−S−D2−R3