Glossary - Festo CPX-CMAX-C1-1 Mounting, Installation And Diagnostics

Contents and general safety instructions

Glossary

Term/abbreviation
0xA0 (A0 )
h
Absolute position
measuring system
Adaptation
Axis string
Bus node
Control interface
CPX modules
CPX node
CPX terminal
Drive
Festo Configuration Tool
(FCT)
Festo Handling and Posi
tioning Profile (FHPP)
Festo Parameter
Channel (FPC)
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
The following product−specific terms and abbreviations are
used in this description:
Meaning
Hexadecimal numbers are marked by a prefixed 0x" or by a subscript
h.".
A position measuring system with fixed (absolute) assignment of
the measured value (position, angle, etc.) and measured variable,
for digital" or potentiometer" CMAX.
CMAX function to improve non−optimal switch−on behaviour automati
cally during operation
Totality of all modules and cables which are connected via the axis inter
face to the CMAX
Establish the connection to specific fieldbuses. Transmit control signals
to the connected modules and monitor their operation (as CPX module:
CPX bus node).
Connection for all modules and cables in the axis string.
Collective term for the various modules which can be integrated in a CPX
terminal.
Collective term for all CPX bus nodes or the CPX−FEC
Complete system consisting of CPX modules with or without pneumatics.
In this description, the term drive" represents linear drives (DGCI, DGP),
standard cylinders, positioning drives (DNC, DNCI, DNCM) or swivel
modules (DSMI).
Software with standardised project and data management for supported
device types. The special requirements of a device type are supported
with the necessary descriptions and dialogues by means of plug−ins.
Fieldbus data profile for Festo position controllers
FHPP−specific parameter access
XVII