Mounting The Vpwp Proportional Directional Control Valve - Festo CPX-CMAX-C1-1 Mounting, Installation And Diagnostics

2. Fitting and pneumatic installation

2.4.2 Mounting the VPWP proportional directional control valve

1
M3 screws with
retaining washers
2
Earth terminal
(see section 3.1)
Fig. 2/4: Mounting the VPWP
1
Mounting at right
angles to the direc
tion of movement
2
Impermissible:
Mounting in the
direction of move
ment
3
VPWP proportional
directional control
valve
Fig. 2/5: Mounting the VPWP on moving parts
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
Mount the VPWP proportional directional control valve on an
even surface with two M3 screws and one retaining washer
each. See Fig. 2/4.
Tightening torque: 1.5 Nm ±10%
1
2
When mounting on moving parts:
Attach the VPWP perpendicular to the direction of move
·
ment. Acceleration forces then have no influence on the
valve slide setting.
1
3
1
2
2−19