Diagnostic Functions With The Cpx−Mmi; Error Display ([Diagnostics] Menu) - Festo CPX-CMAX-C1-1 Mounting, Installation And Diagnostics

5. Diagnostics and error handling
5.5 Diagnostic functions with the CPX−MMI

5.5.1 Error display ([Diagnostics] menu)

System Overview
CPX terminal
0: ... Module ...
1: ... Module ...
! 2: CMAX−C1−1 1 Serð
3: ... Module ...
_____________________________________________________
Diag ßà
1
1
Existing errors
2
[Diagnostics] menu
Fig. 5/3: Error display with the CPX−MMI
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
General information on operating and commissioning the CPX
terminal using the CPX operator unit (handheld) can be found
in the description for the CPX−MMI, type P.BE.CPX−MMI−1−... .
Modules that signal an error are marked in the main menu by
an exclamation mark (!) in front of the module number.
Any errors are displayed as input channel errors in the
[Diagnostics] menu.
_
2:CMAX−C1−1
Monitoring/Forcing (M)
Diagnostics (D)
Parameters (P)
Module data (MD)
OK
_____________________________________________________
Back
CMAX errors cannot be acknowledged with the CPX−MMI.
_ 2:CMAX−C1−1 :D
2
Channel fault:
Ch 0: Input
Configuration error
______________________________________________________
OK Back
3
Error number and description
4
Acknowledge errors (reset)
_
3
4
ßà
5−39