Parameterisation And Commissioning Options - Festo CPX-CMAX-C1-1 Mounting, Installation And Diagnostics

1. CMAX system overview
1.3

Parameterisation and commissioning options

Operated via
FCT CMAX plug−in
Master controller,
CPX node
(CPX bus node or
CPX−FEC)
Tab. 1/1: Commissioning, parameterising and teaching options
1.3.1 Festo Configuration Tool (FCT)
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
Tab. 1/1 provides an overview of the commissioning,
parameterising and teaching options.
Properties
Easy commissioning thanks to special dialogues
and functions.
Direct on−site" operation with drive monitoring
is possible
PC must be connected on site with the diagnostic
interface of the CPX terminal.
Parameterisation of several positioning
systems is possible.
Commissioning and teaching require additional
measures for the necessary drive monitoring.
Additional programming required.
The Festo Configuration Tool (abbreviated as FCT) is the soft
ware platform for configuring and commissioning various
Festo components and devices.
The CMAX plug−in for the FCT helps to carry out all the steps
necessary for commissioning a CMAX.
An overview for commissioning with the FCT can be found in
chapter 4.
The help for the FCT contains the complete information on
operating the Festo Configuration Tool. The device−specific
plug−ins each have their own help files.
For details, see
Chapter 4,
help for FCT CMAX
plug−in
CMAX communication
profile" description,
P.BE−CPX−CMAX−CON
TROL−...
1−7