A.1 Cmax Technical Data - Festo CPX-CMAX-C1-1 Mounting, Installation And Diagnostics

A. Technical appendix
A.1 CMAX technical data
CMAX, general
General technical data
Product weight (with CPX−GE−EV−S)
Protection class as per EN 60 529, completely
installed, plug connector inserted or provided
with protective cap
Protection against electric shock
(protection from direct and indirect contact as
per IEC/DIN EN 60204−1)
Module code (CPX−specific)
Module identifier (in the handheld unit)
Tab. A/1: General technical data
CMAX power supply
Operating voltage / load voltage
The following special features apply:
Load voltage range for valves (U
CMAX current consumption
From operating power supply
Electronics/sensors (U
of load voltage supply for valves (U
Galvanic isolation
between the operating voltage supply for the
electronics/sensors (U
voltage supply for the valves (U
Power failure bridging time
Tab. A/2: Technical data for power supply
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
)
VAL
)
EL/SEN
)
VAL
) and the load
EL/SEN
)
VAL
see CPX system manual P.BE−CPX−SYS−...
Approx. 240 g
IP 65
By means of PELV power circuit
(Protected Extra−Low Voltage)
176
CMAX−C1−1 Positioning module CMAX−C1−1
see CPX system description P.BE−CPX−SYS−...
20 ... 30 V
typically 200 mA at 24 V (see section 3.4.1),
max. 300 mA
typically 1 A ... 2 A at 24 V (see section 3.4.1),
max. 2.5 A
No
10 ms (for systems with the DGCI, a power
dropout > 1 ms causes an error E85)
A−3