Query The Video Priority Settings; Set The Audio Priority Settings; Query The Audio Priority Settings - Lightware UMX-OPT-TX150R User Manual
All-round, universal video and audio transmitter
Hide thumbs
Also See for UMX-OPT-TX150R:
- User manual (103 pages) ,
- Quick start manual (2 pages) ,
- User manual (65 pages)
Table of Contents
Advertisement
Please see section
Explanation: The device uses HDMI priority in the Autoselect mode.
10.4.14. Query the video priority settings
Description: This command queries the video priority mode.
Command {VIDEOPRIORITY=?}
Response (VIDEOPRIORITY=<vpmode>)CrLf ← (VIDEOPRIORITY=1)CrLf
Legend:
Explanation: The device uses HDMI priority in the Autoselect mode.
10.4.15. Set the audio priority settings
Description: This command sets the audio priority order of the Autoselect mode.
Command {AUDIOPRIORITY=<apmode>}
Response (AUDIOPRIORITY=<apmode>)CrLf ← (AUDIOPRIORITY=1)CrLf
Legend:
Please see section
Explanation: The device uses the first detect method in the Autoselect mode.
10.4.16. Query the audio priority settings
Description: This command queries the audio priority mode.
Command {AUDIOPRIORITY=?}
Response (AUDIOPRIORITY=<apmode>)CrLf ← (AUDIOPRIORITY=1)CrLf
Legend:
Explanation: The device uses the first detect method in the Autoselect mode.
Section 10. Programmers reference
<1>
<4>
6.6
on page
31
for detailed information about video Autoselect.
Format
Please read section
10.4.13
Format
<pmode>
Ten kinds of audio priority modes can be:
<0>
<1>
<2>
<3>
<4>
<5>
<H1>
<A1>
<A2>
<S1>
6.7
on page
35
for detailed information about audio Autoselect.
Format
Please read section
10.4.15
DVI-D priority
If there is a valid signal on the DVI-D input, this
port always will be selected, even if the active port
was the VGA or the HDMI input port.
HDMI priority
If there is a valid signal on the HDMI input, this
port always will be selected, even if the active port
was the VGA, DVI-A or the DVI-D input port.
→ {videopriority=?}
on page 76.
→ {audiopriority=1}
Static select:
Digital+Embedded, DVI-A+Analog1, VGA+Analog2
First detect:
Embedded, S/PDIF, Analog 2
Priority:
Embedded, S/PDIF, Analog 2
Priority:
S/PDIF, Embedded, Analog 2
Priority:
Embedded, Analog 2
Priority:
S/PDIF, Analog 2
Fix select: Embedded
Fix select: Analog 1
Fix select: Analog 2
Fix select: S/PDIF
→ {audiopriority=?}
on page 77.
UMX-OPT-TX150R
User's Manual
Example
Example
Example
Page 77 / 107
Advertisement
Table of Contents
Need help?
Do you have a question about the UMX-OPT-TX150R and is the answer not in the manual?
Questions and answers