Port Properties And Settings - Lightware HDMI-TPS-TX210 User Manual

Port tiles
The colors of the port tiles and the displayed icons represent different states and
information:
State indicators
Following icons display different states of the port/signal:
* When Autoselect is enabled the icon is displayed in green.

6.6. Port properties and settings

Left click on Properties button to display the
properties panel of selected port. Signal status
information
parameters are displayed on the panel.
Special functions (e.g. frame detector, port
naming) are also available on the panel. The
look and the content is port-dependent.
Port name
The name of a port can be changed by typing
the new name and clicking the Set button.
The following characters are allowed when
naming:
Letters (A-Z) and (a-z), hyphen (-), underscore
(_), numbers (0-9) and dot (.).
HDCP setting
The HDCP compliancy can be enabled or
disabled on the digital video input port. This
feature can force the source to send
non-encrypted signal if the encryption would
not be necessary and the content allows it.
Section 6. Software control – using Lightware Device Controller (LDC)
1
2
Icon Icon is not displayed
HDCP is not supported
-
-
-
and the
4
3
Icon is grey
Signal is not encrypted
with HDCP
Port is unmuted
Port is unlocked
Autoselect is disabled
most important
HDMI-TPS-TX200 series
User's Manual
Port name
1
2 Port icon
3 State indicators
Signal present (green),
4
not present (grey)
Icon is black
Signal is encrypted
with HDCP
Port is muted
Port is locked
Autoselect is enabled*
Page 41 / 122