Delete Full Backup (Presets, Configurations & Application Settings) - GE Voluson 730Pro Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
4-5-4 Load Full Backup (Presets, Configurations & Application Settings)
8.) Click the NEXT button and then select YES to start, or NO to cancel the restore procedure.
When clicking "YES", the current data on the system will be permanently replaced by
WARNING WARNING
the data of the backup and can not be restored!
!! WARNING:
After restoring the data, the Voluson® 730Pro / ProV reboots and the application starts again.
4-5-5 Delete Full Backup (Presets, Configurations & Application Settings)
1.) Press the UTILITIES key on the control panel. The menu area changes to the Utilities menu.
2.) Select the SYSTEM item from the menu area to activate the setup desktop screen.
3.) Select the
4.) Choose the Destination (e.g., HDD = Hard disk).
5.) Click on the backup to be deleted (additional information is displayed in the table).
6.) Select the DELETE button.
There is no " UNDO" function for this action!
WARNING WARNING
!! WARNING:
4-38 Section 4-5 - Backup and Restore Database, Preset Configurations and Images
DRAFT (A
Figure 4-31 Start Restore Backup now?
page and click the DELETE button of the "Full Backup" group.
BACKUP
Figure 4-32 Full Backup Delete
28, 2008)
PRIL
V ® 730P / P
OLUSON RO RO
S
ERVICE
(cont'd)
choose destination
select backup
select [Delete]
V (BT03)
M
ANUAL