Power Supply Adjustment - GE Voluson 730Pro Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
4-7-2

Power Supply Adjustment

There are no adjustments on the power supplies. The DC Power is self-regulated. If a voltage is outside
the specified range, it means that something is wrong, either with the power supply itself or with a
component connected to that specific power outlet.
Section 4-8
Mechanical Function Checks
4-8-1 Rotation of the Control Console
Table 4-14
Step
1
Do not put your hand between the control console and the main unit when moving the
WARNING WARNING
console to the 0 position: Danger of injuries!
!! WARNING:
4-8-2 Brakes and Direction Locks
Table 4-15
Step
1
4-42
DRAFT (A
Figure 4-35 locking lever under Control Console
Rotation of the Control Console
Pull the locking lever under the Control Console forward, grasp it
at the front grip of the user interface and rotate the console.
Brake
pedal
Figure 4-36 Front Wheel with Brake
Brakes and Direction Lock
Task
Flap the foot rest up and press the release brake pedals on
the front wheels.
Section 4-8 - Mechanical Function Checks
28, 2008)
PRIL
Task
V ® 730P
OLUSON
locking lever
for locking and unlocking
the control console
Expected Result(s)
It is possible to rotate the Control Console up to
30° to the right.
steer able
Front Wheel
Expected Result(s)
The front wheels are engaged / disengaged for
transportation.
/ P V (BT03)
RO RO
S M
ERVICE ANUAL