GE Voluson 730Pro Service Manual page 78

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
3-7-1-1 Install the HP printer software/driver (cont'd)
2.) Click the NEXT buttons to start the Hardware Wizard and to locate the driver files.
3.) Use the BROWSE button to search the following path on the hard disk (see:
-
-
4.) Confirm the correct path and click NEXT to install the driver. All necessary files are copied.
5.) Confirm the installation by clicking FINISH to close the Hardware Wizard.
6.) Close all open windows and restart the system (turn off and on the system).
After boot up of the system, verify the correct settings in the printer "Properties", see:
NOTICE
"Adjustment of Printer Settings" on page
!! NOTICE:Ver
3-28
DRAFT (A
C:\Utilities\PrinterDriver\HPDeskjet990c for HP 990cxi
C:\Utilities\PrinterDriver\HPDeskjet995c for HP 995c, and then click OK.
Figure 3-27 Search for Network path on hard disk
Figure 3-28 Confirm correct path and finish the Installation
Section 3-7 - Printer Installation
28, 2008)
PRIL
3-36.
V ® 730P / P
OLUSON RO RO
S
ERVICE
Figure 3-27)
Section 3-7-4
V (BT03)
M
ANUAL