Hp 990Cxi / Hp 995C- Printer Settings - GE Voluson 730Pro Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
3-7-4-1

HP 990cxi / HP 995c- Printer Settings

1.) Call up the 'Printer Properties'; operation see:
2.) Select the
3.) Select the
"Paper type" should be set to 'Automatic'. See left
4.) Select the
"Orientation" must be set to 'Portrait'. See right
5.) For saving the adjusted printer settings click APPLY and then OK.
6.) Select the
7.) For saving the adjusted printer settings click APPLY and then OK.
Finally close the 'Printers' -window with the close button and exit System Setup with SAVE&EXIT.
8.) Assign the HP 990cxi / HP 995c printer as Report Printer;
see:
9.) Print report page(s) containing measurements.
For operation see Basic User Manual of Voluson® 730Pro / ProV.
10.)Turn off the system!
DRAFT (A
page and click the PRINTING PREFERENCES... button.
GENERAL
page for adjusting print quality and paper size.
SETUP
page for adjusting 'Two-Side Printing' if desired.
FEATURES
Figure 3-43 HP Printer - Settings
page and selct/verify the correct USB printer port.
PORTS
Section 3-7-5 "Remote Control Selection" on page
Chapter 3 - Setup Instructions
28, 2008)
PRIL
Section 3-7-4 "Adjustment of Printer Settings"
Figure 3-43.
Figure 3-43.
3-40.
V ® 730P / P
OLUSON RO RO
S
ERVICE
V (BT03)
M
ANUAL
.
3-37