External Usb-Devices; External Usb-Devices - Connection; External Usb-Devices - Disconnection - GE Voluson 730Pro Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
3-5-11

External USB-Devices

Do not connect or disconnect any external USB-devices to or from the system while
WARNING WARNING
scanning a patient! The appearing dialogs could distract you from the scan!
!! WARNING:
3-5-11-1

External USB-Devices - Connection

When an external USB-storage device (such as a USB-memory stick or external hard disk) is connected
to the Voluson® 730Pro / ProV system, Windows detects the device and automatically installs a driver.
During this process, several dialogs may pop up, starting with the „Found New Hardware" dialog.
The device is then accessible using the drive letter the system assigned to it.
When connecting external USB devices, be sure to execute Safety Directions found in Chapter 2 of the
NOTICE
Voluson® 730Pro / ProV Basic User Manual.
!! NOTICE:
3-5-11-2

External USB-Devices - Disconnection

Before an external USB-device (e.g., USB-memory stick) can be disconnected, the system has to be
informed about the removal of the device! For this purpose the System Setup -
Figure 4-20 on page
Unplugging or ejecting USB devices without first stopping them can often cause the system to
CAUTION
crash and possibly result in loss of valuable data.
!! CAUTION:
By clicking the STOP USB DEVICES button, the „Unplug or Eject Hardware" dialog is started.
Using this dialog, the USB-devices can be stopped before they are physically disconnected.
3-20
DRAFT (A
Figure 3-18 Found New Hardware - USB Device
4-30) has a STOP USB DEVICES button.
Figure 3-19 Unplug or Eject Hardware
Section 3-5 - Connection of Auxiliary Devices
28, 2008)
PRIL
V ® 730P / P
OLUSON RO RO
S
ERVICE
page (see:
BACKUP
V (BT03)
M
ANUAL