Why Do Maintenance - GE Voluson 730Pro Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
Section 10-2

Why do Maintenance

10-2-1 Keeping Records
It is good business practice that ultrasound facilities maintain records of periodic and corrective
maintenance. The Ultrasound Inspection Certificate (see:
documentation that the ultrasound scanner is maintained on a periodic basis.
A copy of the Ultrasound Inspection Certificate should be kept in the same room or near the scanner.
10-2-2 Quality Assurance
In order to gain accreditation from organizations such as the American College of Radiology (USA), it
is the customer's responsibility to have a quality assurance program in place for each scanner.
The program must be directed by a medical physicists, the supervising radiologist/physician or
appropriate designer.
Routine quality control testing must occur regularly. The same tests are performed during each period
so that changes can be monitored over time and effective corrective action can be taken.
Testing results, corrective action and the effects of corrective action must be documented and
maintained on the site.
Your GE service representative can help you with establishing, performing and maintaining records for
a quality assurance program. Please contact us for coverage information and/or price for service.
Section 10-3
Maintenance Task Schedule
10-3-1 How often should care & maintenance tasks be performed?
The Care & Maintenance Task Schedule (see:
ProV should be serviced and outlines items requiring special attention.
NOTE: It is the customer's responsibility to ensure the Voluson® 730Pro / ProV care & maintenance is
performed as scheduled in order to retain its high level of safety, dependability and performance.
Your GE Service Representative has an in-depth knowlegde of your Voluson® 730Pro / ProV
ultrasound scanning system and can best provide competent, efficient service.
Please contact us for coverage information and/or price for service.
The service procedures and recommended intervals shown in the Care & Maintenance Task Schedule
assumes that you use your Voluson® 730Pro / ProV for an average patient load (10-12 per day) and
not use it as a primary mobile unit which is transported between diagnostic facilities.
NOTE: If conditions exist which exceed typical usage and patient load, then it is recommended to increase the
maintenance frequencies.
Abbreviations used in the Customer Care Schedule
• D = Daily
• W = Weekly
• M = Monthly
• A = Annually
10-2
DRAFT (A 28, 2008)
PRIL
page
Section 10-2 - Why do Maintenance
V
OLUSON
page 10-25) provides the customer with
10-3) specifies how often your Voluson® 730Pro /
Table 10-2:
® 730P / P V (BT03)
RO RO
S M
ERVICE ANUAL