GE Voluson 730Pro Service Manual page 115

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
Table 4-5
Step
10
11
12
13
14
15
16
For further details see: Voluson® 730Pro / ProV Basic User Manual, Chapter 7, Spectral Doppler Mode.
DRAFT (A
Spectral Doppler Mode (PW, CW) Functions
Task
PRF
ANGLE
SCALE
FORMAT
FREQUENCY
DYNAMIC
Exit
Chapter 4 - Functional Checks
28, 2008)
PRIL
The Velocity Range display is governed by the pulse repetition frequency (PRF)
Exceeding the maximum PRF, the HPRF-Mode is automatically switched on.
The angle cursor can be turned in both directions without stop. By pressing the
angle knob repeatedly the angle correction switches from +60° to 0° and to -60°.
To select the displayed measuring unit (in relation to the zero-line).
For selection of either one of three formats.
Serves for selection of the required transmit frequency for actual gate position.
Dynamic Range adjusts the display cutoff of the Doppler analysis waveform.
Press the EXIT key on the control panel to exit the PW or CW Sub menu.
V ® 730P
OLUSON RO
Expected Results
/ P V (BT03)
RO
S M
ERVICE ANUAL
4-13