Basic Measurements - GE Voluson 730Pro Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
4-4-7

Basic Measurements

NOTE: Different menus are displayed depending on which Mode is selected.
General remarks to perform Basic Measurements:
• By pressing the CALIPER key on the control panel the Basic Measurement function is switched on.
• Selection of the desired measurement marks is done with the NAVIGATION WHEEL or by pressing
the corresponding keyboard shortcuts.
• If the TRACKBALL MENU NAVIGATION key is illuminated, the trackball is consequently assigned
to select the menu items in the menu area on the left side of the screen.
• Positioning of measurement marks is done with the TRACKBALL.
• Entering and storage of measuring marks is done with SET (right or left trackball key).
• To change measuring marks before completion press CHANGE (upper trackball key).
• To erase measurement results, press the CLEAR ALL key on the control panel or the
DELETE MEAS. key on the keyboard.
• To exit from Basic measurements, press the CALIPER key or the EXIT key on the control panel.
NOTE: The following instructions assume that you first scan the patient and then press FREEZE.
4-4-7-1 Distance and Tissue Depth Measurements (2D and M Mode)
1.) Press the CALIPER key once.
2.) Select the appropriate item from the menu area. An active cursor appears.
3.) To position the active cursor at the start point (distance) or the most anterior point (tissue
4.) To fix the start point, press SET (the right or left trackball key). The system fixes the first cursor
5.) To position the second active caliper at the end point (distance) or the most posterior point
6.) To complete the measurement, press SET. The system displays the distance or tissue depth
Before you complete a measurement:
To toggle between active calipers, press CHANGE (upper trackball key).
To erase results, press the CLEAR ALL key on the control panel or the DELETE MEAS. key on
the keyboard.
NOTE: The CHANGE key alternates the control from one cursor to the other.
NOTE: To exit Basic measurements, press the CALIPER key or the EXIT key on the control panel.
DRAFT (A
depth), move the TRACKBALL.
and displays a second active caliper.
(tissue depth), move the TRACKBALL.
value in the measurement results window.
Chapter 4 - Functional Checks
28, 2008)
PRIL
V ® 730P / P
OLUSON RO RO
S
ERVICE
V (BT03)
M
ANUAL
4-21