GE Voluson 730Pro Service Manual page 253

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
8-6-4 EUM - Upgrade Procedure
7.) Click the EUM button again to install the new EUM.
8.) Select the MO DRIVE or the DVD/CD DRIVE button, depending on the storage medium you use
9.) Browse for the EUMSetup_en_V730Pro.exe file again and click OK.
10.)Confirm the following message with YES to proceed the update.
The contents of this package are being extracted.
11.)Follow the instructions of the "InstallShield Wizard" (confirm the messages with the NEXT key).
12.)After successfully installation of the Electronic User Manual, click FINISH to exit the wizard.
13.)Close the
14.)Restart the system (turn off and on the system).
15.)After rebooting the system, fill in the requested information into the "System Status Messenger" box
and click OK.
16.)Press the F1 key on the keyboard to invoke the electronic user manual.
17.)Press the EXIT key to exit the EUM.
DRAFT (A
(cont'd)
Figure 8-19 Complete Installation
page with EXIT and close the "System Setup" with SAVE & EXIT.
SERVICE
Chapter 8 - Replacement Procedures
28, 2008)
PRIL
V ® 730P / P
OLUSON RO RO
S
ERVICE
V (BT03)
M
ANUAL
.
8-13