Configuration Array Object; Slave Size Object" For "Remote Controller" Operating Mode - Festo CPX-FB36 Instruction Manual

C. EtherNet/IP Objects of the CPX-FB36
C.4.9 "Configuration Array Object"
Attr. Access Description
no.
1 Get/Set Data field with all system and module parameters.
Tab. C/46: "Configuration Array Object"
C.4.10 "Slave Size Object" for "Remote Controller" operating mode
Attr. Access Description
no.
1 Get Number of input bytes for the Remote Controller operating mode
2 Get Number of output bytes for the Remote Controller operating mode
Tab. C/47: "Slave Size Object" for "Remote Controller" operating mode
C-42
The Configuration Array Object is available only for revision
statuses later than Rev. 1.2. Further information about this
object can be found at www.festo.com/sp.
Object class: 199
Instances: 1
Object class: 136d
Instances: 1
This object is only available in the Remote Controller operat­
ing mode.
The slave size object contains the number of I/O bytes for
communication of the bus node CPX-FB36 with a control
block (e.g. CPX-FEC). The setting is implemented via DIL
switches on the bus node CPX-FB36 (è Tab. 1/3).
d
Type
ARRAY
Festo CPX-FB36-EN en 1611a English
Function
no.
–
Type
SINT
SINT