Leuze electronic MSI 400 Series Manual page 41

"Logic" docking window
Change tag names of a predefined input value
Tag names have already been pre-assigned to the predefined input values (bytes). You can change these
tag names:
Ä In the Gateway view click on the byte, whose tag name you want to change.
Ä Open the Properties docking window.
Ä If you wish to change the tag name of the byte:
Overwrite the pre-allocated tag name of the byte with the desired new value in the configuration dialog.
Ä If you also want to change the tag names of individual bits:
Overwrite the pre-allocated values with the desired new value under Parameters in the configuration
dialog.
In the Logic view, these bits will appear with the corresponding tag names.
Configuring additional gateway input values
You can add new output values (bytes) in addition to the pre-allocated output values in the Gateway view.
Ä Click on an empty byte in the Gateway view.
Leuze electronic
Configuration of gateways with MSI.designer
"Gateway" view
MSI 400 41